top of page

Design & Engineering

Staying a step ahead is a big driver for #WonderRoo. That's why we are constantly thinking about what could be made better - improved, simplified or refined. We are setting a new benchmark in quality, innovation and sustainability.


We are the only manufactuer with four distinctive  manufacturing grades.   

Hot Dip Galvanised Chassis


The backbone of a caravan is the chassis. We are one of the few caravan manufacturers who design and built our own chases.  Our chassis are designed and built for the tough Aussie outback. ALL Wonder Roo Caravan chassis  

  • are 3D designed by our team of Australian degree qualified engineers

  • are built with Australian steel in our Somerton factory

  • meet Australian standards and Australian Design Rules (ADRs)

  • are hot-dip galvanised for:

    • long life

    • all over (internal and external), complete protection

    • tougher coating

    • reliability  

    • less maintenance required

    • automatic protection for any damaged areas.

Benefits for our customers:

  • Hot dip galvanising provides both barrier and cathodic protection over the entire steel surface (inside & out) with a tough, durable, abrasion-resistant finish.

  • Galvanised coatings on steel last longer than other options, continually protecting steel against corrosion even if scratched or gouged.

  • Because galvanised coatings provide sacrificial protection to the steel, small, damaged areas do not need touching up (unlike with other coatings).

Sway Control 


Sway control is a standard feature on ALL our caravans; because your safety is important to us. 

Benefits for our customers:

  • Automatically corrects caravan sway, keeping drivers safe on the road.

TIG Weld

We are setting a new benchmark in quality. Our Aluminium walls are TIG (Tungsten inert gas) welded. TIG welding is a gas shielded welding process and is one of the fusion welding processes. As Aluminium has a lower melting temperature than most metals, TIG welding allows for control over the level of heat applied to the metal to create high quality, clean welds with stable connections.

Benefits for our customers:

  • Aluminium frames are durable and less likely to develop structural issues give the TIG weld is the most effective and durable method to join aluminium.

  • TIG Welded aluminium frames offer the rigidity and tolerance levels for challenging off road conditions.

TIG welding.jpg

Honeycomb Plastic Floors


Honeycomb plastic floors are an advanced one-piece seamless caravan floors that is up to 40% lighter than standard 12mm plywood yet much tougher, allowing us to build lighter and stronger caravans.

Benefits for our customers:

  • Super lightweight: lighter to tow; reduced fuel consumption.

  • Impervious to water: unaffected by salt, water and other elements (rot free).

  • Improved quality and durability: delivering a longer lasting van, with better resale value.

  • Impact resistant: reduced risk of damage.

  • New look and feel: new generation composite for better performance and long-term value.

  • Seamless construction: no joins means no squeaking, creaking, sagging, lifting, bubbling or tearing.

  • Easy to maintain: smooth surface can be easily cleaned with conventional methods.

  • Environmentally friendly: kind to the environment, the floor can be either re-used or recycled.

TIG Welded Aluminium Walls

Aluminium is light and durable. However, takes more time, money and equipment to properly engineer and construct Aluminium walls, so that the caravan can tolerate big loads and on extreme terrain. For the same weight, Aluminium walls offer considerably increased strength and durability as it is not susceptible to rot.

Benefits for our customers:

  • Super lightweight: lighter to tow; reduced fuel consumption.

  • Aluminium is not susceptible to rot, therefore more durable. 

Aluminium wall.png

CNC-Cut Walls 

CNC wall.png

CNC-cut plywood with waterproof A bond wall panels are constructed with jigsaw-cut-out sections. These sections bonded with a special adhesive to create a 1-piece wall. The front and rear panels are also dovetailed into the sidewalls, therefore the caravan is structurally stronger and more rigid. This construction method is superior to traditional timber and staples walls and structurally fully insulated.

The CNC walls also allow the creation of a channel running longitudinally across the inner side of the panels for wiring to be safely and neatly contained in its own channel.

Benefits for our customers:

  • Better insulation. 

  • Increased strength and durability. 

Standard Meranti Walls

Meranti – the hardwood of choice is relatively light, strong and flexible – therefore cheaper and easier to work with. Also, not being metal, is not susceptible to electrolysis/corrosion problems. However, meranti is vulnerable to rot when wet, so a small leak can be a major problem. Therefore, it is important to ensure that the caravan remains properly sealed to increase the durability of meranti walls.

Benefits for our customers:

  • Low cost.

Mernti wall.png

CNC-Cut Furniture

All our furniture are 3d designed and CNC-cut. Essentially, the term ‘CNC’ stands for ‘computer numerical control’ - a sophisticated milling system that can do what most experienced craftsmen days to do by hand in minutes with absolute precision, time and time again. So, it ensures our furniture is consistently high quality and finish.    

The furniture is constructed using the tongue and groove interlocking joint system, a method to joint flat panels without gaps. The tongues and grooves of the joints are connected using adhesive, screws to give extra strength to the furniture. Interlocking wood joints consisting of tongues and grooves allow for shrinkage and maintain the integrity of the furniture. Raw, exposed edges of wood panels are also sealed with an edge band for durability. Additionally, full height furniture partitions to increase the strength and endurance of our interiors to handle tough Aussie conditions.

Benefits for our customers:

  • Lightweight solid panel CNC-cut furniture is strong compared to traditional meranti stick furniture with 3mm plywood.

  • CNC furniture gives caravans a modern, streamlined look, compared to meranti stick furniture.

  • CNC furniture’s thicker plywood will hold screws better and longer, particularly under continual flex over the life of the van.

  •  CNC furniture works better than traditional meranti stick furniture in areas where the solid panel act as an additional body bracing.

CNC-cut furniture.jpg

Edge Banding 

Edge banding caravan furniture

Wood panels have a raw, exposed edge when cut to size to make furniture. Edge banding is the process of sealing the raw, exposed edges of wood panels. An edge band is a thin tape of impermeable PVC, acrylic or ABS material cut to fit the size of wood panel and applied on the exposed edge using a strong hot melt adhesive.

The edge band:

  • serve as a de facto seal on the exposed edge thus holds moisture out

  • increase strength and resilience by providing shock protection

  • covers rough edges for a high-quality finish.

Benefits for our customers:

  • Increased durability of the furniture. 

  • Clean modern look with a high-quality finish. 

XPS Insulation 

styrofoam (Facebook Post).jpg

Australian made XPS is the material of choice to insulate Wonder Roo Silver+ and Gold manufacturing grade caravans.
XPS preserves its thermal and physical properties under all conditions due to its high-density closed cell structure.

Benefits for our customers:

  • Superior compressive strength.

  • Long term retained R-values.

  • Extremely durable for long lasting applications.

  • Practically impervious to water.

  • Environmentally friendly (CFC & HCFC free).

  • Manufactured from fire-retardant raw managerial.

  • 100% recyclable.

  • Keeping the heat in during the winter and out during summer.

  • Reduced heater/air conditioner use saves money and decreased environmental impact.

bottom of page